Implementation

A model house

- A model house made up of foam board which we will use to implement the automated and security system.

Indoor ambient temperature control

- A temperature sensor is located indoors, it continuously measures the temperature inside the house.
- A threshold temperature is set so that if the temperature inside the house exceeds the threshold temperature, a fan will turn on that will cool down the house until it bring the house below the threshold temperature.

Humidity sensor

- A humidity sensor is located inside the house to show the humidity.

Outdoor temperature sensor

- A temperature sensor is located outside the house to determine the outdoor temperature.

Indoor lights

- A motion sensor is located indoors that will sense any motion in the house.
- The lights will stay on until it is turned of manually.

Outdoor lights

- A light sensor is located outdoors to determine the brightness outside.
- When it gets dark outside, the lights on top of the door will turn on automatically.

Automated door

- The main door is powered by a servo with a RFID reader.
- When a right RFID tag is scanned by the RFID reader, the door will open automatically.

Security Camera

- A JPEG camera is located in the house.
- When the motion sensor senses motion in the house when it is not supposed to, the camera takes a picture of the inside of the house.

Alarm system

- A speaker is located in the house.
- If the motion sensor senses motion in the house when it is not supposed to, the alarm will sound.

LCD

- A LCD is located inside the house.
- The LCD displays the outdoor temperature, indoor temperature, in door humidity and also whether the fan is turned on or not.

GUI controller

- A C sharp GUI is created.
- The lights, fan, system arm, threshold temperature can be controlled.
- The humidity, indoor temperature, outdoor temperature are displayed.
- The photos taken by the camera is displayed and can be scrolled through.