#include <stdio.h>
#include <string.h>
#include "BasicTyp.h"
#include "common.h"
#include "usb.h"
#include "chap_9.h"
#include "Hal4D13.h"
#include "ISO.H"
#include "MAINLOOP.H"
// *************************************************************************
// Public Data
// *************************************************************************

extern D13FLAGS bD13flags;
extern USBCHECK_DEVICE_STATES bUSBCheck_Device_State;
extern CONTROL_XFER ControlData;

UCHAR ALTERNATIVE_SETTING = 0;

// *************************************************************************
// USB Device Descriptor
// *************************************************************************

#define NUM_ENDPOINTS	4

#define NUM_INTERFACE	2
#define NUM_ALTINTERFACE	2

#define USB_CLASS_CODE_TEST_CLASS_DEVICE                    0xdc
#define USB_SUBCLASS_CODE_TEST_CLASS_D12                    0xA0
#define USB_PROTOCOL_CODE_TEST_CLASS_D12                    0xB0

#define EP0_TX_FIFO_SIZE   64//16
#define EP0_RX_FIFO_SIZE   64//16
#define EP0_PACKET_SIZE    64//16

#define EP1_TX_FIFO_SIZE   16
#define EP1_RX_FIFO_SIZE   16
#define EP1_PACKET_SIZE    16

#define EP2_TX_FIFO_SIZE   64
#define EP2_RX_FIFO_SIZE   64
#define EP2_PACKET_SIZE    64


//#define CONFIG_DESCRIPTOR_LENGTH    NUM_ALTINTERFACE * sizeof(USB_CONFIGURATION_DESCRIPTOR) + NUM_ALTINTERFACE * sizeof(USB_INTERFACE_DESCRIPTOR) + NUM_ENDPOINTS * sizeof(USB_ENDPOINT_DESCRIPTOR)

//#define CONFIG_DESCRIPTOR_LENGTH    sizeof( USB_CONFIGURATION_DESCRIPTOR)//NUM_ALTINTERFACE * sizeof(USB_CONFIGURATION_DESCRIPTOR) +NUM_ALTINTERFACE * sizeof(USB_INTERFACE_DESCRIPTOR) +4 * NUM_ALTINTERFACE * sizeof(USB_ENDPOINT_DESCRIPTOR) 

USB_DEVICE_DESCRIPTOR DeviceDescr =//<<
{
	18,//sizeof(USB_DEVICE_DESCRIPTOR),
	USB_DEVICE_DESCRIPTOR_TYPE,
	0x10,//SWAP(0x200),	//Complient to USB2.0 FullSpeed
	0x01,
	0xdc,//bDeviceClass,
	0x00,//bDeviceSubClass,
	0x00,//bDeviceProtocol,
	64,//EP0_PACKET_SIZE,
	0x71,//SWAP(0x4cc), // Vendor ID for PHILIPS
	4,
	0x66,//SWAP(0x1a62),// Product ID for ISP 1362
	0x6,
	0x0,//SWAP(0x0100),// Device Release Number 1.0
	1,
	0,//STR_INDEX_MANUFACTURER,
	0,//STR_INDEX_PRODUCT,
	0,//STR_INDEX_SERIALNUMBER,
	0x19
  
};

USB_CONFIGURATION_DESCRIPTOR_a ConfigDescr_a=//<<
{
                    9,
                    0x02, //BYTE bDescriptorType //Assigned by USB
                    sizeof(USB_CONFIGURATION_DESCRIPTOR_a), //BYTE wTotalLength
                    0x00, //BYTE wZero, always 00
                    0x01, //BYTE bNumInterfaces
                    0x01, //BYTE bConfigurationValue
                    0x00, //BYTE iConfiguration
                    0xc0, //BYTE bmAttributes, Bus powered and remote wakeup
                    0x1, //BYTE MaxPower
                    9,//sizeof(struct INTERFACE), //BYTE bLength
                    0x04, //BYTE bDescriptionType, assigned by USB
                    0x00, //BYTE bInterfaceNumber
                    0x00, //BYTE bAlternateSetting
                    0x04, //BYTE bNumEndpoints, uses 2 endpoints
                    0x0, //BYTE bInterfaceClass, HID Class - 0x03
                    0x0, //BYTE bInterfaceSubClass
                    0x0, //BYTE bInterfaceProtocol
                    0x0,//BYTE iInterface


/*
//isp1362
    7,
    USB_ENDPOINT_DESCRIPTOR_TYPE,
    0x01,
    USB_ENDPOINT_TYPE_INTERRUPT,
    NONISO_FIFOSIZE_8,
    0,
    1,

    7 ,
    USB_ENDPOINT_DESCRIPTOR_TYPE,
    0x82,
    USB_ENDPOINT_TYPE_INTERRUPT,
    NONISO_FIFOSIZE_8,
    0,
    1,

    7,
    USB_ENDPOINT_DESCRIPTOR_TYPE,
    0x03,
    USB_ENDPOINT_TYPE_BULK,
    NONISO_FIFOSIZE_8,
    0,
    0,

    7,
    USB_ENDPOINT_DESCRIPTOR_TYPE,
    0x84,
    USB_ENDPOINT_TYPE_BULK,
    NONISO_FIFOSIZE_8,
    0,
    0
  },
*/


//=======D12TEST 
    7,
    5,//USB_ENDPOINT_DESCRIPTOR_TYPE,
    0x81,//EP03, 0x4, OUT
    USB_ENDPOINT_TYPE_INTERRUPT,
    0x8,//NONISO_FIFOSIZE_16,
    0,
    10,


    7,
    5,//USB_ENDPOINT_DESCRIPTOR_TYPE,
    0x1,// EP4, 0x5, IN
    USB_ENDPOINT_TYPE_INTERRUPT,
    0x8,//NONISO_FIFOSIZE_64,
    0,
    10,
   
    7,
    5,//USB_ENDPOINT_DESCRIPTOR_TYPE,
    0x82,// EP5 ISO OUT
    USB_ENDPOINT_TYPE_INTERRUPT,
    0x8,//SWAP(ISO_FIFOSIZE_512),
    0,
    0xa,

    7,//sizeof(USB_ENDPOINT_DESCRIPTOR),
    5,//USB_ENDPOINT_DESCRIPTOR_TYPE,
    2,//0x86,// EP6 ISO IN
    USB_ENDPOINT_TYPE_BULK,
    0x8,//SWAP(ISO_FIFOSIZE_512),
    0,
    0xa
};





USB_CONFIGURATION_DESCRIPTOR ConfigDescr =
{
	sizeof(USB_CONFIGURATION_DESCRIPTOR),
	USB_CONFIGURATION_DESCRIPTOR_TYPE,
	sizeof(USB_CONFIGURATION_DESCRIPTOR),
	1,	//NO OF I/F: 1,
	1,  //bConfigurationValue
	0,//iConfiguration
	0xC0,//bmAttributes =>no remote wakeup
	0x1//Max Power
};

USB_INTERFACE_DESCRIPTOR InterfaceDescr0 =
{
	sizeof(USB_INTERFACE_DESCRIPTOR),
	USB_INTERFACE_DESCRIPTOR_TYPE,
	0,//bInterfaceNumber
	0,//bAlternateSetting
	0,//bNumEndpoints
	USB_CLASS_CODE_UNKNOWN,
	USB_SUBCLASS_CODE_UNKNOWN,
	USB_PROTOCOL_CODE_UNKNOWN,
	0,//STR_INDEX_INTERFACE
};


USB_INTERFACE_DESCRIPTOR InterfaceDescr1 =
{
	sizeof(USB_INTERFACE_DESCRIPTOR),
	USB_INTERFACE_DESCRIPTOR_TYPE,
	0,//bInterfaceNumber
	1,//bAlternateSetting
	NUM_ENDPOINTS,
	USB_CLASS_CODE_UNKNOWN,
	USB_SUBCLASS_CODE_UNKNOWN,
	USB_PROTOCOL_CODE_UNKNOWN,
	0,//STR_INDEX_INTERFACE
};


USB_ENDPOINT_DESCRIPTOR EP_Descr[4] =
{

	{
		sizeof(USB_ENDPOINT_DESCRIPTOR),
		USB_ENDPOINT_DESCRIPTOR_TYPE,
		0x03,//EP03, 0x4, OUT
		USB_ENDPOINT_TYPE_BULK,
		SWAP(NONISO_FIFOSIZE_64),
		0
	},


	{
		sizeof(USB_ENDPOINT_DESCRIPTOR),
		USB_ENDPOINT_DESCRIPTOR_TYPE,
		0x84,// EP4, 0x5, IN
		USB_ENDPOINT_TYPE_BULK,
		SWAP(NONISO_FIFOSIZE_64),
		0
	},


	{
		sizeof(USB_ENDPOINT_DESCRIPTOR),
		USB_ENDPOINT_DESCRIPTOR_TYPE,
		0x05,// EP5 ISO OUT
		USB_ENDPOINT_TYPE_ISOCHRONOUS,
		SWAP(ISO_FIFOSIZE_512),
		1
	},


	{
		sizeof(USB_ENDPOINT_DESCRIPTOR),
		USB_ENDPOINT_DESCRIPTOR_TYPE,
		0x86,// EP6 ISO IN
		USB_ENDPOINT_TYPE_ISOCHRONOUS,
		SWAP(ISO_FIFOSIZE_512),
		1
	},
};


unsigned char code REPORT_DESCRIPTOR[50] = {0x05,
                         	0x01,
					0x09,
	                        0x02,
					0xA1,
					0x01,
					0x09,
					0x01,

					0xA1,
					0x00,
					0x05,
					0x09,
					0x19,
					0x01,
					0x29,
					0x03,

					0x15,
					0x00,
					0x25,7,
					0x01,
					0x95,
					0x03,
					0x75,
					0x01,

					0x81,
					0x02,
					0x95,
					0x01,
					0x75,
					0x05,
					0x81,
					0x01,

					0x05,
					0x01,
					0x09,
					0x30,
					0x09,
					0x31,
					0x15,
					0x81,

					0x25,
					0x7F,
					0x75,
					0x08,
					0x95,
					0x02,
					0x81,
					0x06,

					0xC0,
					0xC0,
      };


USB_STRING_LANGUAGE_DESCRIPTOR  strLanguage =
{
  sizeof(USB_STRING_LANGUAGE_DESCRIPTOR),
  USB_STRING_DESCRIPTOR_TYPE,
  0x09,
  0x04
};


USB_STRING_INTERFACE_DESCRIPTOR  strInterface =
{
	sizeof(USB_STRING_INTERFACE_DESCRIPTOR),
	USB_STRING_DESCRIPTOR_TYPE,
	{'I',0,'n',0,'t',0,'e',0,'r',0,'f',0,'a',0,'c',0,'e',0,'0',0,'0',0}
};

USB_STRING_CONFIGURATION_DESCRIPTOR  strConfiguration =
{
	sizeof(USB_STRING_CONFIGURATION_DESCRIPTOR),
	USB_STRING_DESCRIPTOR_TYPE,
	{
	'C',0,
	'o',0,
	'n',0,
	'f',0,
	'i',0,
	'g',0,
	'0',0,
	'0',0
    }
};

USB_STRING_SERIALNUMBER_DESCRIPTOR  strSerialNum =
{
	sizeof(strSerialNum),
	USB_STRING_DESCRIPTOR_TYPE,
   {
	'0',0,
	'0',0,
	'0',0,
	'0',0,

	'0',0,
	'0',0,
	'0',0,
	'0',0,

	'0',0,
	'0',0,
	'0',0,
	'0',0
   }
};
USB_STRING_PRODUCT_DESCRIPTOR  strProduct =
{
	sizeof(USB_STRING_PRODUCT_DESCRIPTOR),
	USB_STRING_DESCRIPTOR_TYPE,
	{
	'P', 0,
	'H', 0,
	'I', 0,
	'L', 0,
	'I', 0,
	'P', 0,
	'S', 0,
	' ', 0,
	'I', 0,
	'S', 0,
	'P', 0,
	'1', 0,
	'1', 0,
	'8', 0,
	'1', 0,
	' ', 0,
	'T', 0,
	'e', 0,
	's', 0,
	't', 0,
	' ', 0,
	' ', 0,
	' ', 0
	}
};

USB_STRING_MANUFACTURER_DESCRIPTOR  strManufacturer =
{
	sizeof(USB_STRING_MANUFACTURER_DESCRIPTOR),
	USB_STRING_DESCRIPTOR_TYPE,
	{
	'P', 0,
	'H', 0,
	'I', 0,
	'L', 0,
	'I', 0,
	'P', 0,
	'S', 0,
	' ', 0,
	'S', 0,
	'e', 0,
	'm', 0,
	'i', 0,
	'c', 0,
	'o', 0,
	'n', 0,
	'd', 0,
	'u', 0,
	'c', 0,
	't', 0,
	'o', 0,
	'r', 0,
	's', 0,
	' ', 0,
	'A', 0,
	'P', 0,
	'I', 0,
	'C', 0}
};

// *************************************************************************
// USB Protocol Layer
// ************************************************************************



// *************************************************************************
// USB standard device requests
// *************************************************************************

void Chap9_GetStatus(void)
{
	UCHAR   endp, txdat[2];
	UCHAR   c;
	UCHAR   bRecipient = ControlData.DeviceRequest.bmRequestType & USB_RECIPIENT;


	if(bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE)
	{
	switch(bRecipient)
			{
			case USB_RECIPIENT_DEVICE:
					if(bD13flags.bits.remote_wakeup == 1)
						txdat[0] = DEVSTS_SELFPOWERED|DEVSTS_REMOTEWAKEUP;   /* remote wakeup and Self-powered */
					else
						txdat[0] = DEVSTS_SELFPOWERED;   /* Self-powered*/
					txdat[1]=0;

					Chap9_SingleTransmitEP0(txdat, 2);
					break;

			case USB_RECIPIENT_INTERFACE:

					Chap9_StallEP0InControlRead();
					break;

			case USB_RECIPIENT_ENDPOINT:

					if( ControlData.DeviceRequest.wIndex == 0x00 )
					{
						endp = -1;
						c = Hal4D13_GetEndpointStatusWOInteruptClear(endp + 1);
						if(c & D13REG_EPSTS_STALL)
							txdat[0] = ENDPSTS_HALT;   /* Halt */
						else
							txdat[0] = 0;

						txdat[1] = 0;

						Chap9_SingleTransmitEP0(txdat, 2);
					}
					else
						Chap9_StallEP0InControlRead();

					break;

			default:
					Chap9_StallEP0InControlRead();
					break;
			}
	}


	else
	{
		if(ControlData.DeviceRequest.wValue == 0 && ControlData.DeviceRequest.wLength == 2 )
		{
			switch(bRecipient)
			{
			case USB_RECIPIENT_DEVICE:
					if(bD13flags.bits.remote_wakeup == 1)
						txdat[0] = DEVSTS_SELFPOWERED|DEVSTS_REMOTEWAKEUP;   /* remote wakeup and Self-powered */
					else
						txdat[0] = DEVSTS_SELFPOWERED;   /* Self-powered*/
					txdat[1]=0;

					Chap9_SingleTransmitEP0(txdat, 2);
					break;

			case USB_RECIPIENT_INTERFACE:
					txdat[0]=0;
					txdat[1]=0;

					Chap9_SingleTransmitEP0(txdat, 2);
					break;

			case USB_RECIPIENT_ENDPOINT:

					if( ControlData.DeviceRequest.wIndex == 0x00 )
						endp = -1;
					else
						endp = (UCHAR)(ControlData.DeviceRequest.wIndex & MAX_ENDPOINTS);

					c = Hal4D13_GetEndpointStatusWOInteruptClear(endp + 1);
					if(c & D13REG_EPSTS_STALL)
						txdat[0] = ENDPSTS_HALT;   /* Halt */
					else
						txdat[0] = 0;

					txdat[1] = 0;

					Chap9_SingleTransmitEP0(txdat, 2);
					break;

			default:
					Chap9_StallEP0InControlRead();
					break;
			}
		}
	}

}

void Chap9_ClearFeature(void)
{
	UCHAR   endp;
	UCHAR   bRecipient = ControlData.DeviceRequest.bmRequestType & USB_RECIPIENT;
	USHORT  wFeature = ControlData.DeviceRequest.wValue;

	if(bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE)
	{
		if( ControlData.DeviceRequest.wLength == 0 )
		{
			switch(bRecipient)
			{
			case USB_RECIPIENT_DEVICE:
						if(wFeature == USB_FEATURE_REMOTE_WAKEUP)
						{
						bD13flags.bits.remote_wakeup = 0;
						Chap9_SingleTransmitEP0(0, 0);
						}
						else
							Chap9_StallEP0InControlWrite();

						break;



			case USB_RECIPIENT_ENDPOINT:

						if(wFeature == USB_FEATURE_ENDPOINT_STALL)
						{
							if( ControlData.DeviceRequest.wIndex == 0x00 )
							{
								endp = 0;
								Hal4D13_SetEndpointStatus(endp, 0);

								Chap9_SingleTransmitEP0(0, 0);
							}
							else
							{
								Chap9_StallEP0InControlWrite();
								break;
							}

						}

						else
							Chap9_StallEP0InControlWrite();

						break;


			default:
						Chap9_StallEP0InControlWrite();
						break;
			}
	  }
	}

	else
	{

		if( ControlData.DeviceRequest.wLength == 0 )
		{
			switch(bRecipient)
			{
			case USB_RECIPIENT_DEVICE:
				if(wFeature == USB_FEATURE_REMOTE_WAKEUP)
				{
					bD13flags.bits.remote_wakeup = 0;
					Chap9_SingleTransmitEP0(0, 0);
				}
				else
				{
					Chap9_StallEP0InControlWrite();
				}

				break;

				case USB_RECIPIENT_ENDPOINT:

				if(wFeature == USB_FEATURE_ENDPOINT_STALL)
				{
					if( ControlData.DeviceRequest.wIndex == 0x00 )
							endp = -1;
					else
						endp = (UCHAR)(ControlData.DeviceRequest.wIndex & MAX_ENDPOINTS);

					Hal4D13_SetEndpointStatus(endp+1, 0);
					Hal4D13_SetEndpointStatus(endp+1, 0);

					Chap9_SingleTransmitEP0(0, 0);
				}
				else
				{
					Chap9_StallEP0InControlWrite();
				}
				break;

			default:
					Chap9_StallEP0InControlWrite();
					break;
			}
	  }
	}

}

void Chap9_SetFeature(void)
{
  UCHAR   endp = 0;
	UCHAR   bRecipient = ControlData.DeviceRequest.bmRequestType & USB_RECIPIENT;
	USHORT  wFeature = ControlData.DeviceRequest.wValue;
  

	if(bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE)
	{
		switch(bRecipient)
		{
		case USB_RECIPIENT_DEVICE:
			if(wFeature == USB_FEATURE_REMOTE_WAKEUP)
			{
				bD13flags.bits.remote_wakeup = 1;
				Chap9_SingleTransmitEP0(0, 0);
			}
			else
			{
				Chap9_StallEP0InControlWrite();
			}
			break;

		case USB_RECIPIENT_ENDPOINT:
			if( wFeature == USB_FEATURE_ENDPOINT_STALL)
			{
				if( ControlData.DeviceRequest.wIndex == 0x00 )
					endp = -1;

				Hal4D13_SetEndpointStatus(endp+1, D13REG_EPSTS_STALL);
				Chap9_SingleTransmitEP0(0, 0);

			}
			else
				Chap9_StallEP0InControlWrite();

			break;
		default:
			Chap9_StallEP0InControlWrite();
			break;
		}
	}


	else
	{
		if( ControlData.DeviceRequest.wLength == 0 )
		{
			switch(bRecipient)
			{
			case USB_RECIPIENT_DEVICE:
				if(wFeature == USB_FEATURE_REMOTE_WAKEUP)
				{
					bD13flags.bits.remote_wakeup = 1;
					Chap9_SingleTransmitEP0(0, 0);
				}
				else
				{
					Chap9_StallEP0InControlWrite();
				}
				break;
			case USB_RECIPIENT_ENDPOINT:
				if( wFeature == USB_FEATURE_ENDPOINT_STALL)
				{
					if( ControlData.DeviceRequest.wIndex == 0x00 )
						endp = -1;
					else
						endp = (UCHAR)(ControlData.DeviceRequest.wIndex & MAX_ENDPOINTS);

					Hal4D13_SetEndpointStatus(endp+1, D13REG_EPSTS_STALL);

					Chap9_SingleTransmitEP0(0, 0);

				}
				else
				{
					Hal4D13_SetEndpointStatus(endp+1, 0);
					Chap9_SingleTransmitEP0(0, 0);
				}
				break;
			default:
				Chap9_StallEP0InControlWrite();
				break;
			}
		}
	}



}

void Chap9_SetAddress(void)
{

	UCHAR   j;

	{
		RaiseIRQL();
		disable();
		if(!ControlData.Abort)
		{
			if(bUSBCheck_Device_State.State_bits.DEVICE_DEFAULT_STATE)
			{
				if((ControlData.DeviceRequest.wValue & DEVICE_ADDRESS_MASK) != 0 )
				{
					bUSBCheck_Device_State.State_bits.DEVICE_DEFAULT_STATE = 0;
					Hal4D13_SetAddressEnable((UCHAR)(ControlData.DeviceRequest.wValue &
											DEVICE_ADDRESS_MASK), 1);
					bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE = 1;
					Chap9_SingleTransmitEP0(0, 0);

				}

				else
					bUSBCheck_Device_State.State_bits.DEVICE_DEFAULT_STATE = 1;
			}

			else if(bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE)
			{
				if((ControlData.DeviceRequest.wValue & DEVICE_ADDRESS_MASK) == 0 )
				{
					Hal4D13_SetAddressEnable((UCHAR)(ControlData.DeviceRequest.wValue &
											DEVICE_ADDRESS_MASK), 1);
					bUSBCheck_Device_State.State_bits.DEVICE_DEFAULT_STATE = 1;
					bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE = 0;
					Chap9_SingleTransmitEP0(0, 0);

				}

				else
				{
					bUSBCheck_Device_State.State_bits.DEVICE_DEFAULT_STATE = 0;
					Hal4D13_SetAddressEnable((UCHAR)(ControlData.DeviceRequest.wValue &
											DEVICE_ADDRESS_MASK), 1);
					bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE = 1;
					Chap9_SingleTransmitEP0(0, 0);

				}

			}

			else
			{

				bUSBCheck_Device_State.State_bits.DEVICE_CONFIGURATION_STATE = 0;
				bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE = 0;
				bUSBCheck_Device_State.State_bits.DEVICE_DEFAULT_STATE = 1;
				j = DEV_BEHAVIOUR_NOT_SPECIFIED;
				Chap9_SingleTransmitEP0(&j, 0);
			}

		}
		LowerIRQL();
		enable();

	}
    printf("Addr %x\n",Hal4D13_GetAddress());
}


void Chap9_GetDescriptor(void)
{
	UCHAR   bDescriptor =      MSB(ControlData.DeviceRequest.wValue);
	UCHAR   bDescriptorIndex = LSB(ControlData.DeviceRequest.wValue);
  //printf("bDescri %d",bDescriptor);
 // printf("Index %d\n",bDescriptorIndex);
//  printf("USB_DEVICE_DESCRIPTORsize %d\n",sizeof(USB_DEVICE_DESCRIPTOR));
 // printf("CONFIGURATIONsize %d\n",sizeof(USB_CONFIGURATION_DESCRIPTOR_a));
	switch(bDescriptor)
	{
	//sDevice sConfiguration
	//sizeof(struct CONFIGURATION)
//sizeof( struct DEVICE)

	case USB_DEVICE_DESCRIPTOR_TYPE:{//1
		Chap9_BurstTransmitEP0( (PUCHAR)&DeviceDescr , sizeof(USB_DEVICE_DESCRIPTOR));
//	    Chap9_BurstTransmitEP0((PUCHAR)&sDevice,sizeof(struct DEVICE));
		break;}
	case USB_CONFIGURATION_DESCRIPTOR_TYPE:{//2
//		Chap9_BurstTransmitEP0((PUCHAR)&ConfigDescr, CONFIG_DESCRIPTOR_LENGTH);

      
		    //printf("\nConfigDescr     \n");  
          Chap9_BurstTransmitEP0((PUCHAR)&ConfigDescr_a, sizeof(USB_CONFIGURATION_DESCRIPTOR_a));//sizeof(USB_CONFIGURATION_DESCRIPTOR));
       //Chap9_SetConfiguration();
        
      //  config_endpoint();
   //       printf("\nInterfaceDescr0  ");    Chap9_BurstTransmitEP0((PUCHAR)&InterfaceDescr0, sizeof(USB_INTERFACE_DESCRIPTOR));
//          printf("\nEP1_TXDesc       ");     Chap9_BurstTransmitEP0((PUCHAR)&EP1_TXDescr, sizeof(USB_ENDPOINT_DESCRIPTOR));
  //        printf("\nEP1_RXDescr      ");    Chap9_BurstTransmitEP0((PUCHAR)&EP1_RXDescr, sizeof(USB_ENDPOINT_DESCRIPTOR));
    //      printf("\nEP2_TXDescr      ");    Chap9_BurstTransmitEP0((PUCHAR)&EP2_TXDescr, sizeof(USB_ENDPOINT_DESCRIPTOR));
      //    printf("\nEP2_RXDescr      ");    Chap9_BurstTransmitEP0((PUCHAR)&EP2_RXDescr, sizeof(USB_ENDPOINT_DESCRIPTOR));
		break;}
	case USB_STRING_DESCRIPTOR_TYPE://3
		switch(bDescriptorIndex)
		{
		case STR_INDEX_LANGUAGE:
			printf("\n str1     \n");
      Chap9_BurstTransmitEP0((PUCHAR)&strLanguage, sizeof(USB_STRING_LANGUAGE_DESCRIPTOR));
			break;
		case STR_INDEX_MANUFACTURER:
			printf("\n str2     \n");Chap9_BurstTransmitEP0((PUCHAR)&strManufacturer, sizeof(USB_STRING_MANUFACTURER_DESCRIPTOR));
			break;
		case STR_INDEX_PRODUCT:
			printf("\n str3     \n");Chap9_BurstTransmitEP0((PUCHAR)&strProduct, sizeof(USB_STRING_PRODUCT_DESCRIPTOR));
			break;
		case STR_INDEX_SERIALNUMBER:
			printf("\n str4     \n");Chap9_BurstTransmitEP0((PUCHAR)&strSerialNum, sizeof(USB_STRING_SERIALNUMBER_DESCRIPTOR));
			break;
		case STR_INDEX_CONFIGURATION:
			printf("\n str5     \n");Chap9_BurstTransmitEP0((PUCHAR)&strConfiguration, sizeof(USB_STRING_CONFIGURATION_DESCRIPTOR) );
			break;
		case STR_INDEX_INTERFACE:
			printf("\n str6     \n");Chap9_BurstTransmitEP0((PUCHAR)&strInterface, sizeof(USB_STRING_INTERFACE_DESCRIPTOR) );
			break;
		default:
			printf("\n str7     \n");Chap9_StallEP0InControlRead();
			break;
		}
	case USB_INTERFACE_DESCRIPTOR_TYPE:
	case USB_ENDPOINT_DESCRIPTOR_TYPE:
	case USB_POWER_DESCRIPTOR_TYPE:
	default:
		Chap9_StallEP0InControlRead();
		break;
	}
}

void Chap9_GetConfiguration(void)
{
	UCHAR   c = bD13flags.bits.configuration;
	UCHAR   j;

	if(bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE)
	{
		j = 0;
		Chap9_SingleTransmitEP0(&j, 1);
	}

	else
	{
		if (ControlData.DeviceRequest.wValue == 0 && ControlData.DeviceRequest.wIndex == 0 && ControlData.DeviceRequest.wLength == 1)
		{

		Chap9_SingleTransmitEP0(&c, 1);
		}
	}

}

void Chap9_SetConfiguration(void)
{
  
	if(bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE)
	{
		if(ControlData.DeviceRequest.wIndex == 0 && ControlData.DeviceRequest.wLength == 0)
		{
			if (ControlData.DeviceRequest.wValue == 0)
			{
				/* put device in unconfigured state */
				bD13flags.bits.configuration = 0;
				bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE = 1;
				Chap9_SingleTransmitEP0(0, 0);
			}
			else if (ControlData.DeviceRequest.wValue == 1)
			{
				/* Configure device */
				bD13flags.bits.configuration = 1;
				bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE = 0;
				bUSBCheck_Device_State.State_bits.DEVICE_CONFIGURATION_STATE = 1;
				Chap9_SingleTransmitEP0(0, 0);
			}

			else
				Chap9_StallEP0InControlWrite();
		}
	}

	else
	{
		if (ControlData.DeviceRequest.wValue == 0)
		{
			/* put device in unconfigured state */
			bD13flags.bits.configuration = 0;
			bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE = 1;
			bUSBCheck_Device_State.State_bits.DEVICE_CONFIGURATION_STATE = 0;
			Chap9_SingleTransmitEP0(0, 0);

		}

		else if (ControlData.DeviceRequest.wValue == 1)
		{
			/* Configure device */
			bD13flags.bits.configuration = 1;
			bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE = 0;
			bUSBCheck_Device_State.State_bits.DEVICE_CONFIGURATION_STATE = 1;
			Chap9_SingleTransmitEP0(0, 0);
		}
		else
			Chap9_StallEP0InControlWrite();
	}

}

void Chap9_GetInterface(void)
{

	if(bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE)
		Chap9_StallEP0InControlRead();


	else
	{

		if ((ControlData.DeviceRequest.wValue == 0 && ControlData.DeviceRequest.wIndex == 0 && ControlData.DeviceRequest.wLength == 1))
			Chap9_SingleTransmitEP0(&ALTERNATIVE_SETTING, 1);      //txdat
		else
			Chap9_StallEP0InControlRead();
	}

}

void Chap9_SetInterface(void)
{
	UCHAR   dir = ControlData.DeviceRequest.bmRequestType & USB_REQUEST_DIR_MASK;

	if(dir)
		Chap9_StallEP0InControlRead();


	if(bUSBCheck_Device_State.State_bits.DEVICE_ADDRESS_STATE)
		Chap9_StallEP0InControlRead();



	else
	{

		if (ControlData.DeviceRequest.wValue == 0 && ControlData.DeviceRequest.wIndex == 0)
		{
			ALTERNATIVE_SETTING = 0;
			Chap9_SingleTransmitEP0(0,0);
		}

		else if (ControlData.DeviceRequest.wValue == 1 && ControlData.DeviceRequest.wIndex == 0)
		{
			ALTERNATIVE_SETTING = 1;
			Chap9_SingleTransmitEP0(0,0);
		}
		else
		{
			Chap9_StallEP0InControlWrite();
		}
	}

}

// *************************************************************************
// Chap9 support functions
// *************************************************************************

void Chap9_StallEP0(void)
{
	UCHAR dir;
	dir = ControlData.DeviceRequest.bmRequestType & USB_REQUEST_DIR_MASK;
	if(dir)
	{
		Hal4D13_StallEP0InControlRead();
	}
	else
	{
		Hal4D13_StallEP0InControlWrite();
	}

	RaiseIRQL();
	if(!ControlData.Abort)
	{
		bD13flags.bits.DCP_state = USBFSM4DCP_STALL;

	}
	LowerIRQL();
}
void Chap9_StallEP0InControlWrite(void)
{
	Hal4D13_StallEP0InControlWrite();

	RaiseIRQL();
	if(!ControlData.Abort)
	{
		bD13flags.bits.DCP_state = USBFSM4DCP_STALL;

	}
	LowerIRQL();
}

void Chap9_StallEP0InControlRead(void)
{
	Hal4D13_StallEP0InControlRead();
	RaiseIRQL();
	if(!ControlData.Abort)
	{
		bD13flags.bits.DCP_state = USBFSM4DCP_STALL;

	}
	LowerIRQL();
}

void Chap9_SingleTransmitEP0(PUCHAR buf, USHORT len)
{

	Hal4D13_SingleTransmitEP0(buf, len);

	RaiseIRQL();
	if(!ControlData.Abort)
	{
		ControlData.wLength = ControlData.wCount = len;
		bD13flags.bits.DCP_state = USBFSM4DCP_HANDSHAKE;

	}
	LowerIRQL();
}

void Chap9_BurstTransmitEP0(PUCHAR pData, USHORT len)
{
	ControlData.wCount = 0;
	if(ControlData.wLength > len)
		ControlData.wLength = len;

	ControlData.Addr.pData = pData;

		if( ControlData.wLength >= EP0_PACKET_SIZE)
		{
			Hal4D13_WriteEndpoint(EPINDEX4EP0_CONTROL_IN, pData, EP0_PACKET_SIZE);

			RaiseIRQL();
			if(!ControlData.Abort)
			{
				ControlData.wCount += EP0_PACKET_SIZE;
				bD13flags.bits.DCP_state = USBFSM4DCP_DATAIN;

			}
			LowerIRQL();
		}
		else
		{
			Hal4D13_WriteEndpoint(EPINDEX4EP0_CONTROL_IN, pData, ControlData.wLength);

			RaiseIRQL();
			if(!ControlData.Abort)
			{
				ControlData.wCount += ControlData.wLength;
				bD13flags.bits.DCP_state = USBFSM4DCP_HANDSHAKE;

			}
			LowerIRQL();
		}
}